Electric Squid Flatten Machine
MC-807
The squid rolling machine is to expand the surface of dried squid, which is suitable for self-employed and vendors. By manually adjusting the gear space and rolling repeatedly, you can quickly increase the surface area. Especially the thicker place, please loosen the space and flatten it gradually. After finish, it will be easier to tear into apart. The characteristic of an electric squid machine is that the user needs to use both hands and feet. The rocker footswitch is used to control the forward or backward movement of the squid, and you can pull the squid by hand. Among them, the thickness of each part of the squid varies, for example, the Calamari is thicker, so you need to switch to loosening space to prevent it from being stuck.Dried squid is a typical snack in Asia, and our machine can help you to deal with it. This model is not for mass production, but one squid one time. It is necessary to move back and forth to achieve the thickness you want, not just only one time. The width of the electric wheel is 160mm, which is equivalent to the width of the Manual Small squid Flatten Machine. About the footswitch, the wire length is fixed.Our machines are 100% made in Taiwan. If you are interested in any kind of one, please click the page below, and leave us some messages.
Manual Squid Flatten Machine
MC-808-1, MC-808-2
The manual squid machines have two sizes, one is the width of the gear of 17.5cm (large), and the width of the gear of 16cm (small). The machine is for commercial usage. The squid rolling machine is to expand the surface of dried squid, which is suitable for self-employed and vendors. Dried squid is a typical snack in Asia; our device can help you to deal with it. Especially the thicker place, please loosen the space and flatten it gradually, and it will be easier to tear into apart.Please place the machine on the edge of the table. Turn the hand-wheel with your right hand and pull the squid with the left hand back and forth. The different parts of the thickness are different, so adjust the gear spacing manually by looser or thinner. In the process, please flatten one squid at one time, and it is necessary to move back and forth instead of doing it once.